|
"Tanzer Boat
Parts"
Eric Spencer,
who was the president of Tanzer Industries, until 1985, when he sold his
interest in the company, has been supplying replacement parts and sails
for all Tanzer models since 1986, through Yachting Services.
Because of a vision problem, he has
decided to reduce his work load, and have others do the job. Consequently,
as of February 25, 2005, all inquiries and orders should be directed to; Ken Hodgson
Tanzer Boat Parts P.O.Box
375 Hudson, QC. J0P 1H0 Canada
Telephone 450-458-4715 Fax
514-693-1124 e-mail kch@sympatico.ca
The principals of this company are
Steve Thom, an ex employee of Tanzer Industries, and Ken Hodgson, who owns
Tanzer 22 #1093 "Sloop Du Jour", and is an avid sailor. Thus they are very
familiar with the Tanzer product line and specifications, and are well
qualified for this role.
Eric Spencer will work closely with
them, and remains available to Tanzer owners for advice. info@yachtingservices.ca 514-697-6952.
Eric is remaining in the boating industry, do you need a Prop Guard or a very Versatile Inflatable?
A partial list of the items
available from Tanzer Boat Parts follows. Although this is posted on the
Tanzer 22 web-site, it is the case that Tanzer Boat Parts can supply
replacement parts and sails for all Tanzer models.
Please contact Mr.
Hodgson for information on prices
and to confirm exactly what parts are available for your Tanzer. They
operate out of the Montreal area at the address indicated above.
List of Tanzer Parts / list provided by "Tanzer
Boat Parts"
Anchor well cover (no fittings, white only).
Backstay adjuster kit, for split backstay.
Boom vang
Boom vang plate.
Bow pulpit--7/8" diam., single.
Boarding ladder--4-step, transom mount, fold down.
Boom, with or without fittings.
Cabin top lifelines and handrails.
Cockpit cushions--2" white vinyl, 4 pcs.
Cockpit lifelines and pelican hooks.
Cockpit locker hatches--white only, bare.
Cockpit locker hatch sponge--20' roll.
Cockpit locker hatch hinges.
Cockpit locker hasp set.
Convertible hatch--retrofit kit.
Convertible hood--retrofit kit.
Companionway sliding hatch.
Decals.
Genoa sheet block--screwdown stop.
Genoa sheet block--spring stop.
Genoa sheet turning block.
Gooseneck track.
Vent covers for dropboards and gas line vent.
Wheel steering--retrofit kit.
HALYARDS
Mainsail--wire only, with shackle.
Jib/Genoa--wire only, with shackle.
Rope tails--main or jib/genoa.
Spinnaker--with snap shackle.
Head liner plugs--white.
Icebox--complete; woodgrain door.
Lifting bridle and keel plates--retrofit kit.
Mast, with or without fittings.
Mast heel casting.
Masthead fitting.
Mainsheet traveler--retrofit kit.
NAVIGATION
LIGHTS
Port/Sbd running lights--side mounted.
Port/Sbd running lights--deck mounted.
Stern.
Steaming.
Outboard motor bracket--spring-loaded, stainless steel.
Owner's guide--photocopy edition, postage included.
Port inserts--smoked acrylic.
Port spline--4' required per port.
Port sponge--4' required per port.
Rubrail--white PVC, with installation
instructions.
|
Rubrail cap.
Rudder gudgeons.
Rudder pintles--long and short.
Rudder--new style; high performance.
RUNNING
RIGGING
Mainsheet--3/8" diam.
Jib sheets--3/8" diam.
Genoa sheets--7/16" diam.
Spinnaker halyard--c/w shackle; 5/16" diam.
Spinnaker sheets--c/w shackle; 5/16" diam.
Spinnaker pole uphaul--c/w snaphook; 5/16" diam.
Spinnaker pole downhaul--c/w snaphook; 5/16" diam.
(Prices include eye splices where applicable; choice red, blue,
or green tracer).
SAILS
Mainsail--5 oz.; includes 1 row jiffy reefing.
(add 20% for fully battened).
Working jib--5 oz.
Genoa #1--170% LP; 4 oz.
Genoa #2--145% LP; 4 oz.
Storm jib--8 oz; 50 sq. ft.
Spinnaker--triradial; racing; 0.75 oz.
Spinnaker--radial; 0.75 oz.
Spinnaker--cruising poleless; 0.75 oz.
Sail cover--main; acrylic; choice of colour.
STANDING
RIGGING
Forestay.
Backstay.
Upper shroud.
Lower shroud.
Main topping lift.
Split backstay--retrofit kit.
Spinnaker gear--retrofit kit.
Spinnaker pole.
Spreaders.
Stern rail--7/8" diam.; single.
TEAK
Companionway hatch runners.
Dropboard channels.
Handrails.
Toe rail.
Cabin sole--teak and holly.
Turnbuttons--anchor well
cover.
TURNBUCKLES
Gibb--5/16"; closed barrel.
Merriman style--5/16" open
barrel.
| |